Dissolved Acetylene Gas Plant

Description

KVK Corporation’s Dissolved Acetylene Gas Plant is designed for controlled acetylene generation, purification, drying, compression and cylinder filling. The plant incorporates automatic control of water feeding, temperature, pressure and residue discharge, supporting efficient carbide utilisation, low gas loss and straightforward operation.

Dissolved Acetylene Gas Plant

Key Features

  • No bulky gas holder required.
  • Automatic control for water feeding, temperature, pressure and slurry residue drain.
  • High absorption of gas in cylinders.
  • Low gas loss and high yield.
  • Simple and safe to operate.
  • Low power consumption.
  • Low maintenance cost.
  • Manufactured as per designs and drawings approved by PESO (Petroleum and Explosives Safety Organisation)
  • Manufactured under ISI quality marking.

Technical Data

Item Source Requirement
A) Acetylene Generator IS 8471 (PT-4) 1977
B) Flame Proof Motors IS 2148 (Group II-B) -1968
Statutory requirement of distance as per Explosive Dept. Acetylene Plant and Carbide godown Should be:
  • 9 meters from lime pits.
  • 15 meters from public road.
  • 15 meters from Electricity room.
  • 30 meters from any other bldg.
  • 30 meters from Oxygen Plant Air intake point
  • Acetone godown of 2,500 Litres capacity should be 6 Meters from any other premises.
Power Supply 440 Volts/ 3 phase/ 50 hertz (If your supply is different from this please specify.)

Specifications 45 M³/Hr. Acetylene Plant 100 M³/Hr. Acetylene Plant
Capacity 45 M³/Hr. Of Acetylene 100 M³/Hr. of Acetylene
Cylinder filled per batch 60 Cylinders 120 Cylinders
Carbide size 15-25mm 15-25 mm / 50-80 mm
Hopper Capacity 200 kgs 300 kgs
Carbide required per batch 1,200 kgs approx
(depending on Carbide quantity)		 2,700 kgs approx
(depending on Carbide quantity)
Power requirement 18 KW 30 KW
Start up time 15 minutes 15 minutes